On a 2002 Buick Rendezvous, the number 1 cylinder is located at the front of the engine on the driver's side. In a V6 engine configuration, the cylinders are typically numbered from front to back, with the driver's side being 1-3-5 and the passenger side being 2-4-6. Therefore, you can find the number 1 cylinder closest to the front of the engine compartment on the left side.
The 2002 Buick Rendezvous has a 3.4 V6. Firing order is 1-6-5-4-3-2.
As viewed from the front of the car, bank 1 is the cylinder bank to the back. Sensor 1 is on the manifold pipe upstream of the catalytic converter. It is visible, but not reachable, from the underside.
Under the alt. Pass side firewall.........
34 mm (or 1 5/16")
The firing order for a 2002 Buick Century 2002 is 1, 2, 3, 4, 5, 6. Cylinder number one is at the front left.
Trouble code P0132 means:O2 sensor circuit high voltage (Bank 1 Sensor 1)
The firing order for a 2002 Buick Century with a 3.1-liter engine is 1-2-3-4-5-6. This means that the cylinders fire in the sequence of cylinder 1, followed by cylinder 2, then cylinder 3, and so on. The engine is a V6, so cylinder 1 is located at the front of the engine on the passenger side.
Bank 1 sensor 1 was the upstream 02 sensor located before the catalytic con on my 03.
with the wires on the top side of the coils from left to right it goes 1, 4, 6, 3, 2, 5
1-6-5-4-3-2according to GM the actual order is 1-2-3-4-5-6 and the 1 cylinder if looking at motor is back left not front
#1 cylinder is on the front right side of the engine.
The firing order for the 2005 Buick Rendezvous, which is equipped with a 3.5L V6 engine, is 1-2-3-4-5-6. The coil pack arrangement corresponds to this firing order, with each cylinder firing in that sequence. For optimal performance, ensure the ignition system is functioning correctly and the coil packs are properly connected.