If you look in the engine compartment , at the firewall , over towards the passenger side , you will see the wiring harness bolted to one end of the PCM . The rest of the PCM is " hidden " behind the glove compartment
Answer It's built into the powertrain control module
AnswerThe powertrain control module is visible from the enginecompartment, it is in the firewall on the passenger side.The RAP module for your keyless entry should be in the jack storagecompartment (at least it is on the 4 door)The powertrain control module is also located behind the passenger side airbag compartment on new models 2000 and up and the 5 yellow numbers on it is also your keyless entry they will not be in the jack compartment on 2000 and up
PCM powertrain control module is located on the firewall on the passenger side. it has 3 large wire connectors.
ECM can stand for Electronic Control Module, or Engine Control Module. A 2000 Oldsmobile Bravada uses a VCM (Vehicle Control Module) which controls the Engine and Transmission. VCM's are commonly referred to as PCM's (Powertrain Control Modules), or ECM's (Engine Control Modules)
In the power distribution box in your engine compartment ( Ford suggests disconnecting your battery before servicing anything in the PD BOX which means your Explorer will have to relearn its idle , clock and radio stations will have to be reset etc ) # 6 - 10 amp MINI FUSE for the powertrain control module # 10 - 30 amp MAXI FUSE for the powertrain control module ( PCM ) power relay # 4 RELAY - is the PCM POWER RELAY according to the owners manual
The powertrain control module passes through the passenger side of the firewall. Looking in the engine compartment, you can see where the wiring harness is bolted to the end of the PCM. The body of it is inside behind the glove compartment.
The Engine Control Module (manual transmission), also known as PCM Powertrain COntrol Module (automatic transmission), is located interior under the glove box.
The powertrain computer controls differ greatly between 1999 and prior years and 2000 and newer. 1999 and older had separate engine control module (ECM) and transmission (TCM)computers, whereas 2000 and newer used a Delphi Delco Electronics powertrain control module (PCM) which combine the engine and transmission modules into one unit. See the related link.
You can find the module for your 2000 Ford Explorer on the firewall in the engine compartment. The module will be on the drivers side of the firewall.
The powertrain control module (PCM) on a 2000 Ford F-250 is typically located on the driver's side of the engine compartment. It is mounted on the firewall, near the brake booster. You may need to remove some covers or components to access it easily. Always consult the vehicle's service manual for specific details and safety precautions.
You can see where the wire harness is bolted to the end of the Powertrain Control Module ( PCM ) from the engine compartment . The PCM passes through the firewall , on the passenger side ( most of the PCM is " hidden " behind the glove compartment
Yes the ecm( engine control module)/ pcm( powertrain control module) are the same thing. Different manufacturers use different acronyms, ECU (engine control unit) is another often used.