On the back of the engine.
On the back of the engine.
It screws into the top of the rear exhaust manifold.
There are two 02 sensors in a 2002 Town and Country. One is in the exhaust manifold, the other is in the tail pipe just behind the catalytic converter.
Upstream is screwed into the rear exhaust manifold. Downstream is screwed into the side of the catalytic converter.
It is on the back of the engine, Under the exhaust manifold.
The oxygen sensors are screwed into the exhaust system behind the engine on a 2002 Chrysler Town and Country.
In the intake manifold, at the firewall,
The catalytic converter in directly behind the engine. ( might need to use a flashlight ) It is bolted right to the exhaust manifold. The catalytic converter in directly behind the engine. ( might need to use a flashlight ) It is bolted right to the exhaust manifold.
exhaust manifold is where exhaust pipe hooks to engine!
\'02 Ventures use M8X1.25X98.5 exhaust manifold studs.
The 2002 Ford escape exhaust manifold will cost approximately $550 to replace. The manifold will cost $300. The labor cost will consist of approximately 4 hours of labor.
Bank 1 sensor 1 is screwed into the exhaust manifold on the back of the engine. Bank 1 sensor 2 is screwed into the catalytic converter.Bank 1 sensor 1 is screwed into the exhaust manifold on the back of the engine. Bank 1 sensor 2 is screwed into the catalytic converter.
The 2002 Chrysler Town-AND-Country has 12 valves.