answersLogoWhite

0

The 2002 Ford escape exhaust manifold will cost approximately $550 to replace. The manifold will cost $300. The labor cost will consist of approximately 4 hours of labor.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

Where is a exhaust manifold ona 2002 Malibu?

exhaust manifold is where exhaust pipe hooks to engine!


What size exhaust manifold studs for a 2002 Chevy Venture?

\'02 Ventures use M8X1.25X98.5 exhaust manifold studs.


How do you replace a 2002 Isuzu trooper starter?

To replace it remove the battery terminal so you will not have power. Loosen the bolts (use liquid wrench or wd40 for this will be rusty) exhaust pipe from the exhaust manifold (driver side) and then you need to loosen the exhaust pipe from the exhaust manifold to the part where it connect exhaust pipe from the other side of the exhaust manifold (passenger side) and then you need to loosen the electrical wire from the starter and then loosen the bolts that connect the starter now you can wiggle the starter to pull it out you need to try to figure out how to get it through the loosen exhaust pipe ( but it should come out)


Which are the intake valves and which are exhaust valves on 2002 Chevy Silverado 1500 2wd 5.3l engine?

The exhaust valves are smaller and lead to the exhaust manifold.


What steps are involved to replace the fuel filter on a 2002 Toyota Tacoma?

Not sure of the V6 but, on a 2.7L A/T, the fuel filter is located underneath exhaust manifold (two pieces), remove all hoses, throttle body, and the exhaust manifold, inspect/clean the injectors since your in there. Super Mario sendz.


Where is 2002 4.0 liter egr valve located?

EGR is located in exhaust manifold.


Where is the oxygen sensor on 2002 Dodge Grand Caravan located?

It is on the back exhaust manifold.


How do you change exhaust manifold gasket in 2002 Chevy cavalier?

To change the exhaust manifold gasket on a 2002 Chevy Cavalier, first disconnect the battery and remove any components obstructing access to the manifold, such as the air intake and exhaust pipes. Then, unbolt the exhaust manifold from the engine block, carefully removing the old gasket. Clean the mating surfaces thoroughly before placing the new gasket and reassembling the manifold. Finally, torque the bolts to the manufacturer's specifications and reconnect any components you removed.


What is the torque for 2002 Blazer for y pipe to manifold 4.3?

Exhaust pipe to manifold nuts, 15 to 22 ft-lbs.


Where is the Oxygen sensor located on a 2002 Bonneville?

start at the exhaust manifold and follow the pipe or if it has dual exhaust follow both, you will see it.


Where are oxygen sensors located on 2002 ford taursu?

Exhaust manifold or exhaust pipes. May be one behind the catalytic converter.


Where is bank 2 sensor 1 o2 sensor on 2002 Chevy s10?

Passenger side exhaust pipe directly after the exhaust manifold.