You can usually find the screw or plug in the oil pan in either the bottom front part of the oil pan on the bottom facing the ground or on the back of the oil pan which would not be visible unless you actually get under the car or put it on a lift. It shoud be facing the back of the motor.
15 mm
dah stupid by removing the screw
It depends if you are loosening it or tightening it.
The size of the oil pan screw for the 2001 Oldsmobile Alero is one half with the threads one eighth inch to 27. The screws can be purchased at any auto parts store.
If you're having trouble removing the oil pan screw on your Jeep Commander, it may be due to rust or corrosion. Try using penetrating oil to loosen the screw; apply it, let it sit for a while, and then attempt to turn the screw again. If it’s still stuck, consider using a different tool like a breaker bar for better leverage, or gently tapping the screw head with a hammer to help break the bond. If these methods fail, you may need to seek professional assistance to avoid damaging the screw or the oil pan.
It's on the back side of the oil pan.
hi you have to remove the oil pan then go to autozone or oriley and tell them you need a oil pan gasket for 96 dodge neon then you would place blue siacone on the oil pan ,then you would place the gasket on the oil pan ,make sure that you can see the screw holes ok very easy.
Its always counterclockwise. isn't it?
climb under it an on the oil pan it has a screw an that's how you take change the oil in a 1997 BMW 313i
You need to remove the transmision oil pan, it is held on by aproximtly 12 screw. You have to replace the filter, use a new gasket and reinstal the oil pan.
13 mm
Counter clockwise. Counter clockwise.