If you're having trouble removing the oil pan screw on your Jeep Commander, it may be due to rust or corrosion. Try using penetrating oil to loosen the screw; apply it, let it sit for a while, and then attempt to turn the screw again. If it’s still stuck, consider using a different tool like a breaker bar for better leverage, or gently tapping the screw head with a hammer to help break the bond. If these methods fail, you may need to seek professional assistance to avoid damaging the screw or the oil pan.
just remove the grills off the speakers with a flat head screw driver
remove Allen screws in the vents pull the covers and remove the deck
Jeep Commander was created in 2006.
If your jeep is a 1999-2004, remove torx head screw from each headlight and pry out gently.
The Jeep Commander was manufactured by Chrysler.
all there is to replacing the alternator is 1. loosin the belt 2. unscrew bottom screw on the alternator (cant miss it) 3. unscrew the top screw 4. remove the alternator from its place 5. remove the 2 power cords attached to the battery and whatnot. its easer than it looks
http://www.fitaudio.com/?View=entry&EntryID=152 Removal instructions with pictures.
== == == ==
you must remove the steering wheel and turn signal from column. then you can acces the screw to remove the switch.
The Jeep Commander seats 7 which is more then all other Jeep Models. The Jeep Commander also rivals all other Jeeps in interior dimensions, with the exception of the Jeep Liberty Limited Edition.
The last Jeep to offer seven passenger seating was the Commander. They Jeep Commander was discontinued in 2010.
http://www.fitaudio.com/?View=entry&EntryID=152 Removal instructions with pictures.