Look on the rubber elbow coming off the throttle body. It's the only sensor that plugs into that elbow.
NO.
the iat sensor is located on the tube running from the air cleaner the sensor has a wire connector running to it
NO it does not.
The iat sensor is in the air filter element. First you take the air filter cover off then you take your air filter out and pick up the housing you will see the only connector with a pigtail. That is your iat sensor!
The iat sensor is the front sensor on the intake manifold it has a gray 2 wire plug that is the 4.0 lt the 2.5 the sensor is the back sensor on the manifold.
The IAT sensor on a 2005 Hyundai is found inside the engine compartment. The sensor is plug into the air box for the air filter.
Hi the IAT Sensor is on the air filter hose, it is build in the Flow Mass Sensor ,it is a plug with 6 wires.
hermafradit
The IAT sensor plug-in is located on top of the air intake right where the air filter is located. I am still trying to find out which color wires are the IAT sensor since the plug-in has 5 wires. If someone has a shop manual and can identify the right two wires, we will have this one licked. a and b are the iat sensor wires which are tan wires
The IAT sensor is a separate two wire plug right off of the air filter box.
The 1994 Jeep Grand Cherokee IAT sensor can be found attached to the air intake hose. The IAT sensor will be near the air filter box.
The combined MAF/IAT sensor (6 wire plug) is on the air intake duct just above the air filter.