0
Generally, if bank one O2 sensor has failed, bank 2 will fail soon, assuming it's either a V6 or V8. Inline engines only have the front O2 sensors. It's a good idea to do both at the same time if it's V configuration engine. They are on the exhaust manifold, right before the connection to the headpipe. It will be the only thing connected to the exhaust that has wires.
What else can I help you with?
Where is bank 1 sensor 2 located on a 1998 Oldsmobile intrigue 385 engine?
On a 1998 Oldsmobile Intrigue with a 3.5L V6 engine, bank 1 sensor 2, also known as the downstream oxygen sensor, is located on the exhaust system. Specifically, it is positioned after the catalytic converter on the bank 1 side of the engine, which is the side that corresponds to the front of the vehicle. Accessing it may require working underneath the car or from the side, depending on the clearance.
Where is the speed sensor located on 1998 olds bravada?
wHereis the abs wheel speed sensor located on 1998 Oldsmobile bravadaI
Where is the starter located in a 1998 Oldsmobile Intrigue?
It is located under the motor, front and center. To access it, you must get under the vehicle.
Where to find a temperature sensor on a 1998 Oldsmobile intrige?
On a 1998 Oldsmobile Intrigue, the temperature sensor is typically located on the engine block, near the thermostat housing or cylinder head. To access it, you may need to remove some components for better visibility. It's advisable to consult the vehicle's service manual for precise location and instructions, as the sensor can vary depending on the engine configuration.
Can a 1999 Oldsmobile Intrigue bumper be put onto a 1998 Oldsmobile Intrigue?
yes They are all the same on the body parts
Where is the PCV valve located on a 1998 Olds Intrigue?
The PCV valve on a 1998 Oldsmobile Intrigue is located under the MAP sensor. If you remove the large plastic cover with 3800 written on it and look to the left side of the engine there is a sensor marked (Pressure Sensor) with 3 wires going into it. Unplug that sensor and turn it counter clockwise and lift it off and you will see the PCV valve under it. Here is a picture to go along with my answer. http://autorepair.about.com/library/illustrations/bl795lib.htm
How do you replace the throttle position sensor in a 98 Olds intrigue?
The 1998 Oldsmobile Intrigue throttle position sensor is held in place with two retaining screws. Remove the retaining screws and the wiring harness. Reverse the process to install the new throttle position sensor.
Where is the outside temperature sensor located on a 1998 Oldsmobile Regency?
I believe it is located underneath the front bumper.
Does a 1998 Oldsmobile intrigue have a blower motor relay?
Yes
What is the coolant capacity 1998 Oldsmobile intrigue?
12.3 quarts
Were do you put freon in a Oldsmobile intrigue 1998?
never use it
How many miles per gallon does a 1998 Oldsmobile intrigue get?
The 1998 Oldsmobile Intrigue gets an estimated 19 mpg in the city. The vehicle gets an estimated 30 mpg highway mileage.
