0
The Powertrain Control Module or PCM is located under the cowl just under the windshield on the passenger side of the van.To access it you must remove the wiper arms,and all the bolts holding the upper and lower cowl.Then remove the screw that holds the wiring harness to the PCM.Finally you can remove the two nuts that hold the PCM in the vehicle and remove it.
under the cowl on the passenger side. I guessed you are asking for the powertrain control module
In the passenger side firewall - on the engine side. You need to remove the plastic shroud in front of the windshield / behind the hood to get to it.
What else can I help you with?
Where is the ignition control module for a 1995 ford windstar?
There is not a stand-alone ignition control module in the Windstars.Ignition control is fully handled by the Powertrain Control Moduel (PCM).See "Related Questions" below for more
What is a PCM on a 1987 ford?
"Powertrain Control Module".
Where is the ignition module on a 1999 Ford Windstar?
If you're looking for a stand-alone ignition controlmodule, there isn't one on the Windstar.This job has been transferred to the Powertrain Control Module (PCM) and its direct control of the coilpack.
Where is the powertrain control module in a 98 ford windstar?
In a 1998 Ford Windstar, the powertrain control module (PCM) is typically located in the engine compartment, mounted on the driver's side, near the battery. It is housed in a metal enclosure and connected to various wiring harnesses. To access it, you may need to remove the battery or other components for better visibility and clearance. Always consult the vehicle's service manual for detailed instructions specific to your model.
Where is powertrain control module located on ford windstar sel 2000?
The powertrain control module (PCM) on a 2000 Ford Windstar SEL is typically located in the engine compartment, mounted on the passenger side, near the firewall. It is often positioned near the battery and may be covered by a protective cover. To access it, you might need to remove any obstructions, such as the battery or air intake components. Always refer to a service manual for exact details and safety precautions.
How do you change the idle on a 2004 Ford Explorer?
The idle is controlled by the powertrain control module ( computer )
How do you adjust the timing on a 1994 4.0L ford ranger?
The timing is controlled by the powertrain control module - not adjustable
Is there a rev limiter on ford explorer 2004?
The Powertrain Control Module will cut back on the fuel to protect the engine
Where is the idle screw on a 06 Ford Taurus?
The idle speed is controlled by the computer ( PCM , Powertrain Control Module )
Where is the computer module on a 1991 ford explorer?
I just learned something ! That the EEC computer and the powertrain control module are the same thing ! On the 1991 and 1992 models the powertrain control module (PCM) is located in the right front passenger area behind the right side kick panel.
Where is the powertrain control module loacted on a 1999 Ford Explorer?
On a 1999 Ford Explorer : You can see one end of the Powertrain Control Module ( PCM ) from the engine compartment . It passes through the firewall and you can see one end where the wiring harness bolts to it . Most of the PCM is " hidden " behind the glovebox area
Engine idle screw on ford explorer 2004 4.6L?
The idle speed is controlled by the powertrain control module ( computer )
