Inside the HVAC housing under the dash.
Look under and behind the air filter housing.
To replace the evaporator coil on a 1998 Plymouth Voyager, first, disconnect the battery and remove the dashboard to access the HVAC unit. Drain the refrigerant from the AC system, then disconnect the hoses and electrical connections from the evaporator. Remove the screws and clips securing the evaporator coil, take out the old coil, and install the new one in reverse order. Finally, reassemble the dashboard, reconnect the refrigerant lines, and recharge the AC system.
It might be hissing due to the bareings going out in it.
On a 2000 Plymouth Grand Voyager, the low-pressure AC port is typically located on the larger diameter hose that connects the AC compressor to the evaporator. This port is usually found near the front of the engine bay, close to the passenger side. Look for a service port with a blue or black cap, which is designed for refrigerant recharge and maintenance. Always ensure the engine is off and the system is not under pressure before attempting any work on the AC system.
How much labor is involved in replacement of an evaporator for a 1999 evaporator
Loose, or worn out.
To remove and replace the AC evaporator in a 2002 Chrysler Concorde LXI, start by disconnecting the battery and draining the refrigerant from the AC system. Next, remove the dashboard and the HVAC housing to access the evaporator. Disconnect the evaporator lines, unbolt the evaporator from the housing, and replace it with the new unit. Finally, reassemble the HVAC housing, reconnect the refrigerant lines, and recharge the AC system.
Try to replace cabin filter of vehicle.
Under the dash in the heater?AC housing.
you go to your local valvoline and i other wise its impossible unless you got the machines
The AC evaporator is located in the lower Dash.
The evaporator drain is on the lower passenger side of the firewall.