The front blower motor power module is under the dash on the passenger side. It bolts to the bottom of the HVAC housing.
Its located on the firewall under the hood on the passengers side...
The blower motor resistor is mounted behind the glove box door.
If you have auto temp control, the blower motor power module has failed. It does the same job as a blower resistor. It is located behind the glove box.
If the fan runs with the HVAC panel shut off, the blower resistor power module has failed.
Resistor or blower motor power module.
The blower control module has gone bad. Carquest has a new one for $20-$25 dollars.
The usual cause is a failed blower resistor, also called a blower power module on a auto temp system.
It is located on the passenger side behind the glove box.
When that happens on a Chrysler Town and Country with auto temperature, the blower motor power module has failed. It is also called a blower motor resistor.
If you mean the blower only goes in the high mode check the blower resistor located in the plenum under the wiper module.
On the auto temp unit it is called a blower power module.
The fuel filter is part of the pump module in the fuel tank on a 2005 Chrysler Town and Country.