The blower motor resistor is located on the passenger side under the glove box. Left side. there is a cover on the blower motor. remve the cover, this is the resistor. there is an electrical plug there.
replace blower motor resistor. It is under the passenger side foot well.
If the AC blower on a 1999 Ford Contour only operates on high, it's likely due to a faulty blower motor resistor. The resistor controls the speed of the blower motor at different settings, and when it fails, the blower may default to just the highest speed. Another possibility could be a malfunctioning blower motor switch or wiring issue. Checking and replacing the resistor is often the first step in troubleshooting this problem.
The blower resistor on a 1999 Chevy truck Z1500 is located behind the glove compartment. There is also a resistor on the firewall next to the blower motor itself.
the contour has problems with the blower motor switch and the resistor. I would check the resistor connector for signs of melting.
Could be, Blown fuse, Bad blower motor, Bad blower motor speed resistor, Bad blower switch,
Blower motor: remove the glove box and you will see the blower motor and blower resistor.
Attached to the blower motor under the passenger dash
the Blower resistor pack is in the vent along the firewall its a white retangular door 1"X2" with one screw with a star head... your local ford dealer has replacement resistor packs and have been redesigned...It fixed the problem with mine...It only cost $14 I have a 1995 ford explorer console fan is not blowing at all (heat or cold). Checked fuse and its OK. Also checked for power to fan (no power). Could it be this blower resistor or blower relay?
Bad blower resistor. I just replaced mine.
figured it out! now i have heat.
There is really no method to "check" the resistor, text by substitution.
there is a resistor that controls the speed and should be near the blower motor its called blower motor resistor