The bleeder valve is a 8mm bolt for the rears located on top of the drum or on the caliper itself if you have disk rear brakes.
For the front, a 10mm bolt is located on the caliper itself.
PB blaster should be used to be sure the bleeder valve is not broken
The bleeder valve for the brakes on a 1997 Ford Ranger is located in the brake line where it meets the brake disc. The wheel will have to be removed to access the bleeder screw for drum brakes.
where is the bleeder valve for 2003 Saturn ion clutch
Brake bleeder? Clutch bleeder? Coolant bleeder?
Yes, the 1999 Cadillac Catera does have a bleeder valve for the brake system. It is typically located on each brake caliper, allowing for the removal of air from the brake lines during maintenance. Proper use of the bleeder valve is essential for maintaining optimal brake performance. Always refer to the vehicle's service manual for specific instructions on bleeding the brakes.
there is not a bleeder hose on the brakes. but there is a bleeder valve on every brake on every wheel
If your talking about the brake bleeder, it is on the caliper/brake cylinder at the wheel.
You should be able to find it on the brake caliper.
Doesn't have a bleeder valve on the master. You have to bleed the brake system at the wheels.
If you're talking about the brake bleeder it's on the caliper.
Doesn't have a cooling system bleeder valve.
The bleeder valve in right on the slave cylinder, no idea how to open it though, it's all plastics and no screws
You can't bleed it any other way, you have to bleed it through the bleeder valve to get all the air out.