Underneath the exhaust manifolds there is one on each side. The driver's side plug can be seen looking up and at the back of the engine. It take a hex tool (mine was 1/4") to go into the plug. The rider's side plug is on the front of the engine. If I could post a photo, I would.
You drain coolant from the radiator. but according to the book ther are two plugs on the engine block that need to drain the coolant from.
lorftion drain plags 3.0 l Ford
The coolant drain plug on a 1994 Ford Laser KH is typically located at the bottom of the engine block. To access it, you may need to remove any underbody covers and ensure that the vehicle is securely lifted. The drain plug is usually a threaded bolt or plug that can be unscrewed to drain the coolant from the system. Always consult the vehicle's service manual for specific details related to your model.
The engine coolant drain plug in the 1996 Ford Probe 4-cylinder is located at the bottom end of the radiator. There is a coolant reservoir at the top of the engine as well.
To drain your coolant there should be a petcock ( metal rectangular screw type drain)or plug on the bottom of your radiator ussually near the left or right side of radiator.
The engine coolant drain plug, on a 1998 Ford expedition, is located on the bottom of the radiator. The drain plug will come out by turning to the left.
The is no drain plug on the engine block. The only "plugs" there is, are freeze plugs, but those have to be knocked out and replaced with new ones, if you want to remove them.
On the bottom of the engine block. It has a drain plug in it for draining the oil.On the bottom of the engine block. It has a drain plug in it for draining the oil.
To drain the radiator on a 2009 Ford with a 5.4L engine, first ensure the engine is cool and then locate the radiator drain plug, usually found at the bottom of the radiator. Place a drain pan underneath, open the drain plug, and allow the coolant to fully drain out. After draining, close the drain plug securely and refill the radiator with the appropriate coolant mixture. Always dispose of the old coolant properly.
To drain the coolant system on a 1998 Ford Ranger, first ensure the engine is cool, then locate the radiator drain plug at the bottom of the radiator. Place a container underneath to catch the coolant, open the drain plug, and allow the coolant to flow out. Additionally, you can remove the radiator cap to allow air in, which helps the coolant drain more effectively. Once drained, close the drain plug and refill the system with the appropriate coolant mixture.
Bottom or rear of radiator
Where is the drain for the coolant on the radiator of a 2002 Ford Explorer sport (v6). Thanks.