I'm guessing that you want to be able to turn off the daytime running lights on your car.
As far as I know, there is no such switch on the Sunfire. The daytime running lights are
on whenever the car is running and is in gear.
Why the hi beam and day light are not working but the low beam are working good on sunfire 99?
IT probably means that ur day time running lights and head light system is bad somewhere...
A night switch can be made by installing a light sensor that detects low light levels, triggering the switch to turn on the lights. The procedure involves connecting the light sensor to the switch to control the power supply based on the ambient light levels. This allows the lights to automatically turn on at night and turn off during the day.
I have a 98 sunfire gt and i have only high beams which only switch on sometimes and no low beams just day lights my shop told me it could be wiring or turn signal switch they looked and determined it was the switch so i just ordered it. They can be found on carpartwholesale.com or autopartwarehouse.com for only 30 or 70 with cruise control. only need a torx wrench and small screwdriver to replace it just snaps into the wiring harness.
I would start with replacing the head light switch
The 2000 Toyota day time running the light relay switch can be found below the dashboard. The switch will be on the passenger side of the passenger compartment.
what about the day running lights? You want to know how to turn them off?If you do then once you start the truck turn the light switch to the left and that shuts them off.
The answer depends on where in the world, in what sort of room or environment.
It's on the front of the transmission. VW Joe! Have a Great Day
I think it is about earth day.... were the world switch off there lights for an hour
Some camcorders have a switch to turn night shot on and off; others switch automatically depending on light level.
Either all brake light bulbs are bad, and yes it is common for all the bulbs to fail with in a day or two. Or the signal light switch has an internal problem.