The diagnostic connector is in the engine compartment on the left hand side between the battery and the fuse box. An adapter is required to read this port with an OBD2/OBDII diagnostic tool.
Where is the diagnostic scanner port on a 1995 F-250 4x4
Before 1995 = OBDI, 1995 and later = OBDII
under hood will say diagnostics on it should be driver side
It should be located under the dash on the drivers side.
kn laser port
There is no 1988 Ford Explorer. The vehicle went into production in 1990 for the 1991 model year, replacing the two door Bronco II;. As for the Bronco II, there isn't an OBD port.
What does the EEC test port have on the plug end and what does it do
where is the ac recharge port on a 93 ford explorer located?
The diagnostic port on a 94 Ford Taurus is located under the hood near the firewall usually on the driver's side. Ford started producing the Taurus in 1985.
The diagnostic port is located at the bottom of the lower dash panel to the left of the steering column.
the diagnostic port is located behind the fuse box on the passenger side inner fender well
The diagnostic port on a 1995 Isuzu Rodeo drive is located on the lower kick panel on the driver's side. It is just below the left spark plug.