right rear of engine connected to exhaust manifold.
The egr valve on a Chrysler Pacifica is on the front of the engine. It is near the top, behind the water pump.
You have to call your local dealer with the VIN to answer that question.
The EGR valve on a 2.5L 2005 pacifica is located behind the engine on the right hand side. shouold be same on '04It is on the driver side rear of the engine.
It is part of the EGR valve on the driver side of the rear cylinder head.
It is possible that a part of the EGR valve has fallen out. This will cause a very loud exhaust noise.
The valve needs replaced. There is a metal plug that has fallen out.
It measures how far open the EGR valve is. It is built on the valve.
The egr position sensor is on the egr valve which is above the alternator on the passenger side of the engine.
see link for pic of a Chrysler egr valve.
I can't provide diagrams, but I can describe the location of the EGR valve on a 2004 Chrysler Pacifica. The EGR valve is typically found on the engine's intake manifold, near the throttle body. It’s a small, metal component connected to the exhaust system, usually with a vacuum line or electrical connector attached to it. For precise location and identification, consulting the vehicle’s service manual or an online repair guide is recommended.
No, there are no common problems with this cars transmission. The 2008 model did have ocassional problems with motor mounts breaking. Year models 2005, 06, 07 have EGR valve problems. 2005 have brake problems.
On the 3.8L it is above the alternator on the passenger front of the engine.