If you remove the air cleaner from the top of the carburetor and look at the front of the carburetor you will see a big medal line going to the carb. You will need a 1 inch wrench and a 5/8 inch wrench to take the fuel line loose from the carb. The fuel filter is behind the 1 inch fitting that's screewed into the carb.
5 QTS. with a new filter.
Disconnect the fuel line from the carb with a 5/8" line wrench then unthread the fitting in the carb with a 1" wrench. The fuel filter is inside that fitting. Take note how the filter and spring are assembled into the carb for reassembly.
the fuel filter on a 1986 ford ranger is located on the inside of the frame on the drivers side in front of the gas tank.
the fuel filter is located on driverside rear in front of the rear wheel.
Gas Tank
there isn't one
how do you adjust rear brakes on a 1986 chevy silverado?
The fuel filter for a 1986 Chevy G20 should be mounted on the frame under the van. The filter is an inline type and should be easy to change.
THE FUEL FILTER IS UNDER THE HOOD ON THE WHEEL WELL, LEFT OF THE ALTERNATOR.
On the fuel line going to the carburetor.
The 1986 Chevrolet C10 pickup truck fuel filter is located inside of the fuel tank. The fuel tank will need to be removed in order to change the fuel filter.
The fuel filter is located just below the drivers door on the frame rail. There are two clamps to pull the filter.