how to reset a fuel pump on a Mazda MPV van 2000
on an '01 Mazda MPV the fuel pump is on the left side of the vehicle. older MPVs have it on the right
1990 Mazda MPV with 3.0 (V6) engine. The fuel pump is located under the middle seat. You have to remove the middle seat then lift up the carpet to access the access plate. Remove the access plate bolts to access the electric in-tank fuel pump.
Easy pull passenger side carpet ,., unscrew 4 nuts ,., remove metal shield ,., now you will see ,., the PCM ,., On the left ,., a green relay
Mounted on top and inside the fuel tank.
The fuel pump is in the fuel tank and the fuel tank will have to be removed to access it. If you do not have the skill or equipment to do this properly, I suggest taking it to a shop.
The fuel pump is mounted on top and inside the fuel tank. The filter may be integrated into to fuel pump or it will be located between the fuel tank and the engine.
in the pump, which is in the tank.
inside the gas tank
To replace the fuel filter on a 1991 Mazda MPV, first, ensure the vehicle is turned off and relieve fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls. Next, locate the fuel filter, typically found along the fuel line under the vehicle or near the engine. Using appropriate tools, disconnect the fuel lines from the filter, being careful to catch any spilled fuel. Finally, install the new filter in the same orientation, reconnect the fuel lines, and replace the fuel pump fuse before starting the engine to check for leaks.
I have a 90 MPV and also the shop manual (a real one) and I did not find a reset button in the manual or the vehicle. The later model MPV may have one.
I have a 90 MPV and also the shop manual (a real one) and I did not find a reset button in the manual or the vehicle. The later model MPV may have one.