On a 1996 Mercury Grand Marquis, the hazard flasher is typically located on the dashboard, near the center console. It can be identified by a red triangle symbol and is usually positioned close to the headlight and turn signal controls. To activate the hazard lights, simply press the flasher switch.
On the left side of the steering column there is a light black tab that you pull down.
The hazard flasher on a 2000 Mercury Cougar is located under the dash on the driver's side of the vehicle. It is in the slot next to the turn signal flasher above the brake pedal.
Well, honey, on a 1987 Mercury Marquis, the turn signal flasher is usually located under the dashboard on the driver's side. It's a small cylindrical device that makes that annoying clicking sound when you use your turn signals. Just follow the sound of the click, and you'll find it in no time. Good luck, sweetie!
Turn signal flasher?
check beyond the top of the steering wheel. between the steering wheel and the indicators, you should see the button to turn on the hazard lights..
The turn and hazard flasher relays are incorporated into hazard switch.
the flasher is located under the dash down near the ash tray
It is located underneath the hazard switch, as it is incorporated with the hazard switch.
== ==
hazard flasher mounted in rear of fuse block under dash left of the steering column turn signal flasher mounted in lower corner of the same fuse block
Integrated with the hazard flasher switch (which is in the dash)
Have solved the problem. Hazard and turn flasher are one and the same unit.