There is no kill switch. It's passlock, a passive security system that works with your radio, ignition, and dashboard. There is a procedure to bypass passlock, but it's complicated. To get your car started, just leave the ignition on for 10 minuites and the security light will go out, and you can start your car. If you've recently changed a radio, dashboard, or installed a remote starter, you probably affected passlock.
Wire, Switch, Motor, window regulator.
There is an electrical problem with the switch or wiring. Have it checked out/
you should be able to take the cover off the driver's door by unscrewing it,then unplug the window switch and replace it,fairly easy..
when i got into the car to start it it wouldn't even try nothing it had power to everything else and a new battery it just flashed security what can i do to disarm the security system
It should a have fuel pump relay located under the hood in the power distribution box. If your looking for an inertia kill switch it doesn't have one.
Neutral switch Starter solenoid Starter Loose or dirty battery cable
Rack and Pinion with power assist.
On top of the power steering pump dummy
under neath the power stearing pump.
Check to make sure there is power going to your coils from your ignition switch.
Remove the belt from your 1992 Chevy Lumina power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
It is below the alternator and kind of hard to see.