On a 1994 Chevrolet S-10, the orifice tube is located in the refrigerant line, specifically in the liquid line that runs between the condenser and the evaporator. It is typically found near the firewall or in the engine compartment, often along the passenger side. Accessing it may require removing some components for better visibility and reach.
where does orfice tube go show diagram
The orifice tube on a 1998 Chevrolet S10 pickup is located in the high-pressure line of the air conditioning system, specifically between the condenser and the evaporator. To access it, you'll need to disconnect the high-pressure line. It is typically found near the front of the vehicle, close to the condenser, and can be somewhat challenging to reach. Be sure to follow proper procedures and safety precautions when working with the A/C system.
lower tube coming out of evaporator (inside black thing on firewall) remove line coming from condenser. It is inside there.
replacement of the transmission dipstick tub seal on a 1994 s10 blazer
Many of the GM vehicles have the AC orifice inside the condenser fitting that goes between the condenser and the cabin.
The 1994 S10 uses a MAP sensor, not a MAF sensor. We need to know size engine you have in that S10.
The 1994 S10 has a fuel pressure regulator located in the throttle body.
It does not have one
The fuel filter for a 1994 s10 Chevy is located on the drivers side. It is on the frame rail under the drivers door.
Assuming you are going to install a new one, use a small fishing hook and a pair of pliers to hook the old one and pull it out.
On the throttle body.
Passenger side kick panel area.