On the 2000 Firebird 3800 V6, the PCV valve is under the MAP sensor. It is on the top of the engine on the upper plenum.
Is on the pas danger side of the intake a little being the throttle body
The pcv valve is located on one of your valve covers.It will have a black hose running to your air breather
The PVC valve on a 1998 firebird is on the passenger side. It is on the valve cover about halfway between front and back.
On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.
the PCV valve is located on the valve cover of a 1991 Regal Custom. It is plugged in and can be easily changed.
on top of the manifold under the plate that says"PCV VALVE" you will need to remove two 10mm bolts...
Some of the 2000 models have a PCV valve on the back of the valve cover. The other models do not have a PCV valve, but use an oil/air separator instead.
The PCV valve on a 1994 Regal Custom should be located on top of the valve cover. It is a plug in type and is easily changed.
The PCV valve for a 2000 Lexus rx300 is on the passenger side of the engine. It is on the valve cover near the back.
It's just above the center of the valve cover on the driver side.
the PCV valve should be located on top of the engine block, on the passenger side. there will be 2- 10mm bolts holding it down and a plate will be labled (PCV) on it. simply remove bolts, the spring and the PCV valve should be sitting right there.
The PCV valve on a 2000 V6 Camry is found near the engine. More specifically, it is located on the top of the valve cover.