It is located on the driver's side of the radiator in the lower corner. It is plastic and green in color. Mike
The radiator drain plug on a 2000 Chevy Venture is removed by slowly turning it in a counter-clockwise direction. Care must be taken when re-installing the plug to prevent cross threading.
there should be a bleed valve towards the bottom of the rad. It will look like a " T : .
To remove the radiator drain plug on a 2000 Chevy Venture, you'll typically need a 19mm socket or wrench. It's important to ensure the engine is cool and to use a container to catch any coolant that may spill when you remove the plug. Always check for any signs of wear or damage on the plug before reinstallation.
It is just beneath the lower radiator hose.
you dont you turn it and pull out the plug stays in the rad
There is a drain on the lower right of the rad. If you can't get to it, pull the lower hose.
I think I had the same problem on my 2000 and decided to just take off the lower radiator hose to drain it.
AnswerLook at the bottom or rear of radiatorit is on the front right of radiator!!on bottom.
Every 160 000 km if it has Dexcool in the rad.
front splash shield has to come off! then you can see the drain on the right bottom of radiator looking at it from front of car. you can use a Allen wrench to loosen the drain plug.
the radiator drain plug is on the bottom right facing car from front. you may have to remove the sheild to get at it. my 2000 malibu uses a allen wrench to loosen the drain plug for the radiator. good-day !
Use a flared end wrench or crows foot to loosen.