On all 91-93 Deville cars. remove the glove box unit and it is DIRECTLY above the opening, just to the left of where your dash says "Cadillac" The smaller box toward the drivers side is the Chime module for lights, seat belt, etc. You want the larger black box with A LOT of wires coming out. There will be two 7mm (or 9/32 US) bolts that are a little tricky to get to.
Programming is done through the cars computer diagnostic connector under dash. Only cars with the RPO option code AUO in the trunk will have this FACTORY module. A lot of these cars had add on remote / alarm systems since you had to buy a 400 dollar security option package to get this when the cars were new back then.
To reset the keyless receiver on a 1992 Cadillac DeVille, first, ensure the vehicle is turned off and the key is removed from the ignition. Then, locate the keyless entry module, usually found in the trunk or under the dashboard. Disconnect the module's power connector for about 10 seconds, then reconnect it. Finally, reprogram the keyless entry remotes as needed to complete the reset.
The keyless entry receiver is under the console - behind the screens it's the temp and compass
The ignition switch, also called the wireless control module, is the keyless entry computer and receiver.
Must go to a dealer
2000 Ford Taurus keyless entry does notwork what could be wrong?
The module for keyless entry on a 2000 Ford Taurus is located under the driver side dashboard. It is a small box that controls all the functions of the alarm system.
25 - 50 bucks at the dealer
This model never offered keyless entry. It can be made to have keyless entry with after market products.
form_title= Automotive Keyless Entry form_header= Lost your keys? No problem. Get automotive keyless entry. How frequently do you lose your keys?*= _ [50] How long have you owned your vehicle?*= _ [50] Why do you want keyless entry?*= _ [50]
To determine if your 1996 Tahoe has factory keyless entry, check for a keyless entry remote or fob that may have come with the vehicle. Additionally, look for a small receiver module, typically located near the driver's side under the dashboard or in the center console. You can also check the vehicle's owner's manual or contact a dealership with your VIN to confirm if keyless entry was included in your specific model. Lastly, try locking and unlocking the doors with the key fob or by using the lock button on the driver's door; if they respond, you likely have factory keyless entry.
Yes , keyless remote entry
One reason that your keyless entry may not work is that the battery is dead, take it an auto parts store and have the keyless entry battery replaced. If that does not fix it you will need to take it to the dealer to have the keyless entry reprogrammed.