Insert ignition key into front grille just beneath the bonnet turn anti clockwise to release bonnet and turn clockwise to release safety catch and lift bonnet
There is a keyhole hidden behind the Ford logo in the grille Take the transit door key come to the front of the van and look at grill under the bonnet their you will find a place where this key can be inserted and turn this realises the lock and the bonnet will pop open.
turn ignition key in lock on front grille
Hi,I assume that the bonnet is the same as the Connect and Focus?If it is, there is a lock on the bonnet/hood. Either behind the badge or the flip up panel
all you can do is drill it out and use a grinder as well takes around a hour to do big job
Remove the grill, then undo the bolts under the lock to release the barrell. Using a stubby Phillips screw driver you then undo the lock as if you were using the key to open bonnet. Then just undo the 4 10mm bolts that hold the assembly to slam panel, then refit in reverse.
the Ford badge on the front of the bonnet lifts up to reveal the bonnet release lock. Use the ignition key and turn to position 1, lift the bonnet, then turn to position 2 to fully release
The shift lock release is usually a button on the side of a shifter. The shift lock release button needs to be pushed in before the car can be moved from Park to another gear.
get a pair of long nose pliers, to the left of the bonnet lock (as you look at it) is the bonney cable, insert the pliers through the grill to get hold of the cable and push it to your right, towards the lock and the bonnet should pop. the just release the catch and it should open.
To take off a bonnet lock, first, ensure the vehicle is off and the keys are removed from the ignition. Locate the bonnet release lever inside the car, usually found near the driver's seat, and pull it to release the initial latch. Then, go to the front of the vehicle, feel for the secondary latch under the bonnet, and push it to one side while lifting the bonnet gently. Always refer to your vehicle's manual for specific instructions related to your model.
To reset a TSA lock, locate the reset button on the lock. Press and hold the reset button while setting your desired combination. Release the reset button to save the new combination.
Even if the trunk release is broken, the external key lock should be able to open the trunk.
To reset a TSA lock 007, locate the reset button on the lock. Press and hold the reset button while setting your desired combination. Release the reset button to save the new combination.