The starter relay on a 1995 Chrysler Cirrus with a V6 engine is located in the power distribution center (PDC), which is situated in the engine compartment. The PDC is typically found near the battery, mounted on the passenger side. You can identify the starter relay by referring to the diagram on the cover of the PDC for proper labeling.
95 Chrysler cirrus has a fuel shut off relay located under hood in box with other relay and fuses
On a 1990 Chrysler New Yorker, the starter relay is built into the starter. The starter is located on the front of the engine, behind the engine mount.
If the radiator fan does not shut off on a 1996 Chrysler Cirrus, the fan relay might be bad. The fan relay is usually located in a bank of relays near the battery.
The starter solenoid is part of the starter. The starter relay is in the under hood fuse box.
If the Chrysler Sebring won't start after going through a puddle, the problem is probably that the starter relay switch got wet. This is not a common thing but if the starter relay was bad to begin with, moisture will make the problem worse. The starter relay is located on the starter.
On a 1998 Chrysler Cirrus, the fuel pump relay is located in the power distribution center, which is found in the engine compartment. It is typically situated near the battery, and the relay is labeled for easy identification. To access it, you may need to remove the cover of the power distribution center. Always refer to the vehicle's service manual for specific details and diagrams.
where is the starter relay located??
Chrysler does not have inertia or reset switches. The fuel pump is controlled by a relay in the under hood fuse box on Cirrus.
Indirectly, the starter relay is computer controled.
Where is the starter relay located on the 1996 Oldsmobile 88?
Where is the starter relay located on a jetta 1997 truck 2.0?
The starter relay is part of the starter.