follow the top radiater hose to where it goes to the motor there should be a bubble looking metal houseing if it is it will be inside.
where is the blower motor located a a 1997 oldsmobile achieva
The thermostat on a 1997 Oldsmobile Achieva SL goes on the very bottom of the water pump. It is inside the top hose of the radiator on the end that attaches to the water pump.
Which engine is in this car?
The transmission sifter interlock solenoid location on a 1997 Oldsmobile Achieva is on the valve body. To reach it the drain pan and filter has to be removed.
Under dash on driver's side
In the 1997 Oldsmobile Achieva, the thermostat is located in the engine compartment, specifically on the engine's water outlet housing, which is typically near the top of the engine. To access it, you may need to remove the upper radiator hose that connects to the thermostat housing. It's advisable to have the engine cool before attempting to replace the thermostat to avoid burns or injury.
leftof steering column behind i/p
On a 1997 Oldsmobile 88, the thermostat is located at the engine's front, where the upper radiator hose connects to the engine block. To access it, you typically need to remove the upper radiator hose and the thermostat housing. It's advisable to allow the engine to cool before attempting to replace the thermostat to avoid burns.
On a 1997 Oldsmobile Achieva SL, the spark plugs are located on the engine, beneath the ignition coils. To access them, you typically need to remove the engine cover and the ignition coil pack, which sits directly above the spark plugs. The spark plugs themselves are threaded into the cylinder head and can be accessed once the ignition coils are removed.
its very hard to get to. if you look down the firewall on the left side. you have to remove the heat shield. i wound up dropping the exhaust and removing the exhaust manifold because its mounted under the water pump which is under the manifold.
The timing is computer controled and not setable.
The thermostat on a 1997 Oldsmobile Aurora is located in the engine compartment, specifically on the engine block near the upper radiator hose. To access it, you will need to remove the hose that connects to the thermostat housing. The thermostat is housed within this assembly, which is typically secured by bolts. Be sure to allow the engine to cool before attempting any work in this area.