Lift hood. Locate area between engine and transmission, look down, follow the vacuum line from the maifold to just above the starter. The unit screwed into the side of the tranny with the vacuum line coming out is the modulator.
i wnt to know how to dis-assemble a transmission in a 1996 chevy lumina
Your transmission is most likely a 4T60E. If so, it has no modulator valve. This transmission is electronically controlled from the ECM. Line pressure, which is what the old modulator valve controlled, is now controlled by an internal pcm solenoid.
NO.
yes it will fit
Well, isn't that a happy little question! The modulator valve on a 1994 Chevy 1500 pickup is typically located on the transmission. It helps regulate the transmission fluid pressure to ensure smooth gear shifts. Just remember, there are always friendly folks at auto shops who can help you find and take care of your modulator valve if you need a hand.
A 1996 Chevy Lumina transmission will hold four and a half quarts of oil. A 1996 Chevy Lumina will also hold 12 quarts of transmission fluid.
modulator is round and located on the drivers side of the transmission. modulator unscrews from the transmission if it is a 700 R4 It unbolts with 2 7/16 bolts if it is a turbo 350 Unplug the vaccum line remove the modulator replace with new modulator hook up new vaccuum line
That year did not use a modulator valve. The transmission is COMPUTER controlled.
A four speed automatic transinission is in a 1997 Chevy lumina
That transmission does not have a modulator valve on it. It is computer controlled to a point.
That transmission is electronic controlled. No need for a modulator valve.
on the side of the transmission