It is on the back of the transfer case, takes a 10mm Allen wrench to remove.
The transfer case on a 2004 Ram uses ATF+4.
If equipped, it is on the top of the transfer case and has four vacuum lines plugged into it.
It is located underneath between the transmission and driveshaft.
To pull the transmission with the transfer case from a 2005 Dodge 3500, first ensure the vehicle is securely lifted and supported. Disconnect the battery, then remove the driveshafts, exhaust components, and any necessary electrical connectors. Disconnect the transmission cooler lines, and unbolt the transfer case from the transmission. Finally, support the transmission with a jack and remove the transmission mount bolts before carefully pulling the assembly out of the vehicle.
Automatic transmission fluid.Automatic transmission fluid.
Mopar ATF+4
Does it have a full time transfer case? My 2000 durango has a full time transfer case, which means you have to keep it in 4WD.
A 1995 Dodge Ram does not have a transfer case control module. The transfer case is mechanically controlled.
On a Dodge truck, the vacuum switch is on the transfer case.On a Dodge truck, the vacuum switch is on the transfer case.
2WD, no. 4WD, yes. The transfer case has to be in neutral with the transmission in park.
Auto is a 48re Manual is a NV5600 if a steel case, G56 if an aluminum case.
get underneath and look for a transfer case to front end, there will also be driveaxles to eack front wheel assembly