The dipstick is a special tool that only the dealer or transmission shop will have. The tube is behind and below the coolant bottle.
The dipstick is a special tool that only the dealer has.
The tube is on the passenger side of the engine. The dipstick is a special tool that only the dealer has.
The dipstick is a special tool only available to the dealer.
The dipstick is only available to the dealer.The dipstick is only available to the dealer.
The dipstick is a special tool that only the dealer has.
The fluid is added down the dipstick tube with a funnel.
The dipstick tube is on the passenger side of the engine. Your problem will be the the dipstick is a special tool that only the dealer has.
The transmission dipstick, On a 2008 Chevy cobalt, can be found at the back of the engine compartment, near the center. The dipstick handle will be bright yellow.
There is an oil dipstick. If there is no A/T dipstick the transmission is sealed for life.
It requires a dipstick, which is a dealer only tool. Actual you can buy one online: http://www.etooldirect.com/assenmacher-spr886-sprinter-transmission-dip-stick-level-finder.html Just search the internet they are out there to be found.
To fill the transmission fluid on a 2010 Sprinter, first ensure the vehicle is on a level surface and the engine is running at operating temperature. Locate the transmission dipstick, remove it, and use a funnel to add the appropriate type of transmission fluid through the dipstick tube. After adding fluid, check the level with the dipstick and repeat the process as necessary until the fluid reaches the correct level. Always consult the owner's manual for specific fluid specifications and capacity.
Down the tube on the passenger side of the engine. You will not have a dipstick though, since that is a special tool at the dealer.