To fill the Transmission Fluid on a 2010 Sprinter, first ensure the vehicle is on a level surface and the engine is running at operating temperature. Locate the transmission dipstick, remove it, and use a funnel to add the appropriate type of transmission fluid through the dipstick tube. After adding fluid, check the level with the dipstick and repeat the process as necessary until the fluid reaches the correct level. Always consult the owner's manual for specific fluid specifications and capacity.
Dry fill is about 8-9 quarts.
You fill transmission with fluid through the transmission fluid dipstic tube
Dry fill is between 8 and 9 quarts. Filter service should be 4-5 quarts.
Where do I fill the transmission fluid gmc Safari van?
I have a 1951 flathead fordomatic automatic station wagon. Where do I fill the transmission fluid?
The trans dipstick tube runs up the passenger side of the engine. The fluid is added through it. The dipstick itself is a special tool that only the dealer has.
Dry fill is about 8 quarts
Dry fill is about 8 quarts
and what type transmission fluid
Unscrew oil level fill plug. Fluid should be level with bottom of plug
Unscrew oil level fill plug. Fluid should be level with bottom of plug
If you over fill your transmission fluid, you might blow out the transmission seals. It is most likely that some fluid will overflow, but no damage will occur.