0
What else can I help you with?
What is the correct gap setting for the throttle plate on a 1989 325i M20 engine?
For a 1989 BMW 325i with the M20 engine, the correct gap setting for the throttle plate is typically around 0.5 to 1.0 mm when the throttle is closed. This gap ensures proper idle and responsiveness. It's essential to check the service manual for any specific adjustments or tolerances that may apply to your vehicle. Always verify settings against manufacturer specifications for optimal engine performance.
Which throttle setting to start push lawn mower?
full
How can you determine the correct setting for the automatic transmission kick down cable on a 1991 for Mustang?
ford makes a tool for setting the throttle pressure cable(kick down cable).You can buy one of these from your local ford dealer for about mmmmmmmm15 to 19 dollars.easy to use
What is function of trotle position sensor for jaguar s type?
The throttle position sensor is an input to an engine control computer that sets the amount of mixture provided to the engine, in conjunction with the amount of air flowing into the engine - by setting the ifuel njection solenoid pulse length.
How to change a throttle sensor?
unhook your battery. remove sensor. no setting is needed.
How do you fix touchy throttle on Arctic Cat prowler 1000 09?
To fix a touchy throttle on a 2009 Arctic Cat Prowler 1000, first check the throttle cable for proper tension and adjustment; it should have a small amount of slack when released. Inspect the throttle body for any obstructions or sticky components, and clean it if necessary. Additionally, ensure the throttle position sensor (TPS) is properly calibrated, as an incorrect setting can lead to erratic throttle response. If issues persist, consider consulting a professional mechanic for a more thorough diagnosis.
What is correct setting a positive example for them or setting a positive example to them?
for them
What is the proper setting for the air fuel screw on a 97 yz 250?
The proper setting is based on the air available. This is to say your location above sea level. The closer you are to sea level the more fuel an engine can burn. The further you are from sea level the thinner the air or less oxygen available the less fuel you are able to burn. When you set the screw you can get an idea of the correct setting by how quick the throttle response. When you have gone to far which is giving the engine to much fuel mixture the throttle response will slow. Start with it turned almost all the way in and turn out 1/4 turn until the throttle response slows then turn back in 1/2 turn.
Where's the correct temperature to metal thickness chart for arc welding?
I am assuming you are asking for the correct machine setting. It depends on the electrode type and size not the thickness of the metal. Each electrode has a correct amperage setting for the diameter of the electrode used and can vary for the position it is used on. Usually flat, horiz., and overhead will be the same. Vertical a little less. Also the thicker the coating the more amperage needed.
What causes a lawn mower engine to rev up and down with out moving the throttle setting?
The governor spring adjustments
What happens if elbow joint fracture is left untreated?
The bones will heal in the wrong position therefore the elbow might not be able to bend and move. If this happens, the way some doctors reset the arm is by re-breaking the elbow then setting the arm in the correct position in surgery.
What is the air mixture correct adjustment of keihin carburetor attached to Honda xr200?
The correct air-fuel mixture adjustment for a Keihin carburetor on a Honda XR200 typically involves setting the pilot screw to about 1.5 to 2.5 turns out from the fully seated position. This can vary slightly based on altitude and modifications, so it's best to start within this range and adjust as needed for optimal performance and smooth idling. Always ensure the engine is warm when making adjustments, and fine-tune based on throttle response and engine behavior.
