0
What else can I help you with?
My headlights work only on high beam?
Possible that both dip beam bulbs have blown
Why dont your high beams turn on but your low beams both work on your 2000 ford expedition Is there a fuse for it?
It sounds like the low beam/high beam switch is bad. Fuses are not the problem since they are built into the headlight switch and would cause headlights to blink or not come on for both high and low beam headlights.
How can the low beam headlights work but no high beams on headlights don't work?
The switch is broken. You need to replace it.
You cant get the headlights to work on your corvette. The parking lights brake lights and turn signals work.?
if you've tried hitting the high/low beam switch & headlights are out on both, then a bad headlight switch or headlight switch plug or high/low beam switch plug not fully engaged.
Your low beam headlights work but not high beam for 1992 camaro rs?
the high beams work off of a different fuse , both low beams are on the same fuse. fuse panel under dash on drivers side
If your high beam do not work but your low beam headlights do?
I just fixed this problem , it was my daytime running light module
1988 crown Victoria all headlights go out on low beam but work on high beam?
As silly as it sounds, both low beam bulbs are most likely blown. If not, check switch in the steering column.
Are both headlights on each side supposed to work when your high beams are on for a 1989 Suburban?
just the two inside lights the out sidelights are low beam
Why does 240sx high beams work on both headlights but not low beams?
the bulbs in your car have two filaments, high beam and low beam. as you generally use mainly low beam the filament wears out a lot quicker than high beam. so replace your bulbs, as it couldn't be anything else.
Why headlights work on low beam but not on high beam on 1997 Ford F-150?
If the headlights on a 1997 Ford F-150 work on low beam but not on high beam, the issue could be due to a faulty high beam relay, a burned-out bulb in the high beam circuit, or a problem with the wiring or connections specific to the high beam system. Additionally, a malfunctioning switch on the steering column could prevent the high beams from activating. It's advisable to check the bulbs, fuses, and relays to diagnose the problem effectively.
Your peugeot 306 xnd headlights work on full beam the low beam will not work the fuses and lamps are ok and the dashboard light says the low beam is on and it isn't any ideas anyone?
If the low beams are not working on a Peugeot 306, it is possible that the low beam headlights are burned out. If the high beam headlamps are part of the same bulb, perhaps the wrong bulbs are in the sockets. Some older cars have both the high and low beams running off the same bulb and the low beam can burn out both sides at the same time.
Why would the low beams not work on a 1991 Dodge Dynasty if the high-beam headlights do work?
"It's possible that you blew the low beam filaments. I blew my high beam filaments while charging the battery." --MM
