0
What else can I help you with?
When you turn the high beams on your 93 Cabriolet the left highbeam and fog light do not come on There is no power to either light but on low beam the headlights work?
There is one fuse for the left highbeam and one for the right. The left fuse was loose.
Why do my Jaguar's headlights only work with the high beams on?
It's most likely that your headlights are just dead. There are separate filaments for your headlight and your highbeam, so odds are both headlight filaments are burned out, but your highbeam filaments (which probably get used less) are still fine. It's not unusual for both headlights to burn out at the same time. Throw in another pair of headlights, it's probably the cheapest thing to rule out and the most likely solution.
How do you adjust 05 Dodge Dakota headlights?
To adjust the headlights on a 2005 Dodge Dakota, first park the vehicle on a level surface about 25 feet away from a wall. Turn on the headlights and mark the center of the light beams on the wall with tape. Locate the adjustment screws, typically found on the headlight assembly, and turn them to raise or lower the beams until they align with the tape marks. Ensure the beams are aimed slightly downward to avoid blinding oncoming drivers.
The headlights of a 1998 dodge durango don't turn on but the hi-beams do turn on it's not the fuse or the relay what is it?
Check the headlight bulbs.
Why do my highbeams work but my headlights do not?
The headlights are on two different fuses. The high beams are on one fuse and the low beams are on another fuse. The fuse for the low beams may need to be changed.
Why do my jetta highbeams work but my headlights do not?
The headlights are on two different fuses. The high beams are on one fuse and the low beams are on another fuse. The fuse for the low beams may need to be changed.
Why does your 2001 dodge caravan not have day time running lights or dash lights?
Check all fuses and check for burn out headlights, high and low beams
What is a low beam?
Well, assuming that you are talking about headlights, the low beams are the dimmest settings for the drive headlights, while high beams are the brightest setting.
Why do my headlights turn off when I turn the high beams on?
Your headlights turn off when you turn the high beams on because you have a defective switch. You need to have a mechanic replace the high beams switch. It is a simple replacement.
Why would the low beams work and the high beams not work on a 93 ford ranger?
On a '93 Ranger there is an independent fuse in the underhood power distribution center just for the highbeams. Check continuity if it is good, you may have 2 other possibilities. Either the highbeam capsule bulbs are burned out or you have a problem with the highbeam multifunction switch. !!
What is a sign of a blown fuse or a short in the headlights?
one or more headlights don't work but others do.none of the headlights will work.high beams work but low beams don't and vice versa.lights flicker and sometimes go dim.
Why would headlights stay on and have to click high beams twice to turn off and now the windshield wipers stay on even after you turn the car off on a 1996 Dodge Grand Caravan?
ask this to the dumb mind of the dodge creator.
