0
The headlights are on two different fuses. The high beams are on one fuse and the low beams are on another fuse. The fuse for the low beams may need to be changed.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
My headlights do not work but my highbeams do and sometimes if I jigle my multifunction switch my headlights work again do I need to replace the multifunction switch?
yes, replace the switch
Highbeams not working on my 2001 ford f150 I changed both bulbs. when i turn on the highbeams the headlamps go out. If i turn the highbeams off the headlights come on?
Check the switch on turn signal stalk - do they work when you pull back on stalk? Check relay in power distribution box
Why do my highbeams work but my headlights do not?
The headlights are on two different fuses. The high beams are on one fuse and the low beams are on another fuse. The fuse for the low beams may need to be changed.
What are the best replacemebt headlights for a Mk6 Jetta?
The best replacement headlights for a Mk6 Jetta are the black LED Projector Headlights.
Why do your headlights only operate as highbeams you turn the low beams on and they work as parkers then you turn low beams on and all lights work as one?
I think faulty light switch.
Why would the heater wipers and lowbeams on a 1992 VW Jetta not work but when holding highbeams on everything works?
I had a similar problem with my Jetta. It turned out to be the ignition switch. It takes a little work to change it as the steering column has to come out to disconnect the ignition switch from the bottom of the tumbler( where the key goes in). i
Why my 1998 jetta turn signals only work intermittantly?
because that what they are for. otherwise they would be orange headlights.
How do you replace the headlights on a 2003 VW Jetta GLS?
Remove the wiring harness from the back of your 2003 VW Jetta. Remove the headlight assembly retaining bolts. The headlights will come out. Reverse the process to install your new headlights.
94 Toyota pickup when you turn highbeams on they don't work but when you flash the highbeams they do work?
Probably a issue with the multifunction swith (headlamp switch). You'll need to test the switch.
Why would both headlights of a 1996 Jetta cut out at once when the high beams and parking lights still work?
the dimmer switch is going out if you are experencing that.
Why would the high beams not work on a 1990 Lincoln Town Car with auto headlights and auto dimmer if the dash indicator is lit?
Ok... need a little more info here... but if the high beams work manually, but not with the auto dimmer, my first guess would be that you have a faulty relay somewhere in the system. If the highbeams don't work at all (manually or otherwise) then I would guess the highbeams could be burned out, or you could have a faulty dimmer switch / relay. Good luck! .
What is the problem if the high beams come on but won't stay on when the switch lever is released on a 95 jetta?
On a 95 Jetta you push the lever forward to keep the highbeams on pulling it is just to flash them. also make sure you have the main light switch turned on as well.
