answersLogoWhite

0

The most common reason for a 1996 Chrysler Cirrus odometer and RPM gauge to stop working is a fuse. If the fuse is removed from the dash and replaced, often times the odometer and RPM gauge will begin working.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is wrong with a 1997 Chrysler Cirrus when the odometer and RPM gauge stop working How can you fix with proper mileage showing?

Usually the cluster has failed. You will need a new one, or a used one that has the same mileage showing.


2002 Chrysler Sebring 4 door with no odometer light This light is located in the rpm gauge The trip light on the speedo gauge is working?

The odometer unit has failed and will need replaced.


Your rpm gauge and odometer gauge stop working?

Get to a shop quick.


My 1990 Dakota speedometer stopped working but the odometer works fine. How can I get the speedo working?

The gauge has failed.


Odometer problems on grand caravan 2002?

If both odometer and speedometer are not working I would blame the vehicle speed sensor. If just the odometer isn't working the gauge cluster assembly needs to be replaced with a reconditioned one.


How do you reset radio in a Chevy Venture?

My fuel gauge, odometer and radiator gauge isn't working and my radio says locked. How can I fix this?


What is wrong with a 1996 Chrysler Sebring when the odometer and RPM gauge stop working?

If it is just those two that have quit, the cluster has failed.If it is just those two that have quit, the cluster has failed.


What is wrong with a 1997 Chrysler Sebring when the odometer and RPM gauge stop working?

The 2 resistors in the guage cluster have come unsoldered. It is an easy fix. Here is an illustrated guide on how to do it from start to finish, and it only takes about an hour. http://members.cox.net/dpeters30/97_sebring_dash.htm


Temp gauge not working on 1997 Chrysler sebring?

Check your grounding on your temp sending unit.


Why doesnt my speedometer in a 92 jeep Cherokee workbut the odometer does. I have replaced the sensor.?

you need to change the speedometer cause if your odometer is counting then speedometer should be working too. make sure your speed gear its working its in the side of the transmission The odometer and speedometer read off of the same signal. If one works, the signal is ok and the other gauge is bad.


What causes the fuel gauge temperature gauge odometer speedometer not to work on Pontiac Sunbird?

If the fuel gauge, temperature gauge, odometer, and speedometer are not working on a Pontiac Sunbird, it could be due to a faulty instrument cluster, a blown fuse, or issues with the vehicle's wiring or connectors. Additionally, a malfunctioning vehicle speed sensor (VSS) can affect both the speedometer and odometer. Checking the fuses and inspecting the wiring for damage are good first steps in diagnosing the problem. If those are intact, the instrument cluster or VSS may need to be tested or replaced.


Where is the digital odometer located on a Chrysler sebring go?

The digital odometer on a Chrysler Sebring is typically located on the instrument cluster, which is directly behind the steering wheel. It is usually integrated into the dashboard display alongside other gauges, such as the speedometer and fuel gauge. To view the odometer reading, simply turn on the ignition, and it should be visible on the display. In some models, you may need to toggle through different displays using the buttons on the dashboard or steering wheel.