The 2 resistors in the guage cluster have come unsoldered. It is an easy fix.
Here is an illustrated guide on how to do it from start to finish, and it only takes about an hour.
http://members.cox.net/dpeters30/97_sebring_dash.htm
The odometer unit has failed and will need replaced.
The most common reason for a 1996 Chrysler Cirrus odometer and RPM gauge to stop working is a fuse. If the fuse is removed from the dash and replaced, often times the odometer and RPM gauge will begin working.
Check your grounding on your temp sending unit.
If it is just those two that have quit, the cluster has failed.If it is just those two that have quit, the cluster has failed.
In a 2000 Chrysler Sebring, the fuse for the speedometer and gas gauge is typically located in the fuse box under the dashboard on the driver's side. You should check the owner's manual for the exact fuse number, but it is usually labeled as "Instrument Panel" or "Gauges." If the gauges are not functioning, inspecting and replacing this fuse may resolve the issue.
Get to a shop quick.
Over temperature warning.
In the middle (about 195 degrees).
The gauge has failed.
If both odometer and speedometer are not working I would blame the vehicle speed sensor. If just the odometer isn't working the gauge cluster assembly needs to be replaced with a reconditioned one.
Usually the cluster has failed. You will need a new one, or a used one that has the same mileage showing.
My fuel gauge, odometer and radiator gauge isn't working and my radio says locked. How can I fix this?