0
What else can I help you with?
No brake lights on you cavalier 1994 fuse working?
cavalier break lights not workin no indicators neither help fuseis gud do i need to change panals were bulbs go or what????????????
Why would lights clicker and go deem when car wants to cut off the car is an 1985 Chevy cavalier?
Why would lights clicker and go deem when car wants to cut off the car is an 1985 Chevy cavalier?
Why does your amp gauge go down when you turn on your lights?
The amperage gauge will go down when you turn on your lights, because there is a sudden draw of electric power from the battery. The alternator should equal out the power surge.
1998 Chevy cavalier z24 warning lights stay on all the time?
what are the warning lights in the Chevy cavalier z24. and what do they mean
How do you fix your lighting problem with your 94 Chevy Cavalier Z24 you have no tail lights dash lights or parking lights?
how do you fix your lighting problem with your 94 chevy cavalier z24 you haveno tail lights dash lights or parking lights
Will the tail lights from a 2002 cavalier fit in the rear light buckets of the 2003 cavalier?
YES
How to repair gas gauge and speedometer not working on 2003 cavalier?
First check the fuse for the 2003 Cavalier gauge. Next check the fuel sending unit in the fuel tank to insure that its working properly. Check the gauge next, then the wiring for the system. One of these units is causing your gauge to not work.
What does Gauge Check light mean in Toyota cavalier 2.4 1999 model?
The gauge check light is just a reminder to check your gauges.Probably your fuel gauge is below a set point.Just put gas in it and it will go off. Rember..its not the check engine light...
Your gas gauge temperature gauge and automatic lights don't work. any ideas as to whats wrong with my car?
Start with the fuses, then go to the more complex problems
Reverse lights not working on 2002 Cavalier Fuses and bulbs are good?
The 2002 Cavalier has a reverse light switch. The switch can be bad, or have a loose connection causing the lights not to work.
What is the recommended gauge of wire, 12 or 14, for connecting lights in a residential setting?
The recommended gauge of wire for connecting lights in a residential setting is typically 14 gauge.
Dash lights explorer?
The dash lights on an Explorer are used to light the warning symbols and to illuminate the speedometer, gas gauge, and RPM gauge. These lights are controlled by fuses.
