A 1992 GMC Jimmy that idles well but stalls when accelerating or shifting into gear may have issues related to fuel delivery, such as a clogged fuel filter or failing fuel pump, which can restrict fuel flow under load. Additionally, problems with the ignition system, like worn spark plugs or a malfunctioning ignition coil, can cause stalling during acceleration. Another possibility is a vacuum leak or a malfunctioning idle air control valve, affecting air-fuel mixture during higher demands. Diagnosing these issues with a thorough check of the fuel and ignition systems is essential for resolution.
Try putting up the kickstand
clutch switch is bad
First what motor is in the van? Than tell me what it does before it stalls or you put it in gear. There many different possiables that it could be.
If it is stalling when putting it into gear but not while idleing I would check your mass air flow sensor. It may need to be cleaned or replaced. If it is stalling when putting it into gear but not while idleing I would check your mass air flow sensor. It may need to be cleaned or replaced.
This tranny has a the feature of putting itself into "limp" mode when it senses a problem with itself. Limp mode is full-time second gear.
your car stalls when u gear down because you geared down too much. your car stalls when u gear down because you geared down too much.
If the automatic transmission car jerks when accelerating and the dash does not indicate a gear, there is a problem with the transmission. Check the shift solenoid.
hi it sounds like your universail joints or tail shaft
Check your fuel pressure first then go from there.
check for vacuum leak or dirty fuel filter
it sounds like the neutral switch
what causes a boat motor 40 hp to stall when it is put in gear