Brakes are adjusted too tight. Brakes are misassembled. Brake hose is restricted, holdings the brake on.
You take the cap off of the master cylinder and pour it in.
Mounted under the hood on the driver's side next to the firewall. Same place you will find the master cylinder on most cars. Has a yellow cap.
It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.
On your brake peddle there is a switch it is either bad or stuck, most likely.
The price of brakes lines for 1999 Chrysler Cirrus LXI vary depending on the seller. They can range from 30 to 50 dollars as of 2014.
Under the hood, driver side, near the base of the windshield.
on the brake pedal bracket there is an acuator it may be adjustable or you may need to replace it
Master Brake cylinder replaced and lines bled-how long?
It goes into the reservoir that is on the far driver side under the hood. It is located close to the bottom of the windshield.
Bad master cylinder.
in the fuse panel unde the dash look for st lmp(stop lamp)
Could be any of a number of reasons !... Faulty bulb, broken wire, dirty contact....