It's the blower motor resister.
A blower motor resistor controls the speed of the fan from low to the 2nd highest by going through a resistor block. The resistance changes on each coil, therefore changing the speed of the blower. high setting bypasses all of the coils and runs at full speed.
You know yours has gone bad if it only runs on high.
Read more: Operation_of_a_blower_motor_resister
A blower motor that only works on high is normally caused by a defective Blower Motor Resistor Pack. DRL, do not have a clue.
from what i have read it is the blower motor resistor it goes bad and only lets the fan run on high google blower motor resistor and read on
it's a problem with the blower motor resistor,
Probably a bad blower motor resistor
If you are referring to the blower motor only working on the high speed setting, then the problem is the blower motor Resistor Pack is defective. Replace it. It can be the blower motor speed control switch but not likely.
The blower motor resistor has failed.The blower motor resistor has failed.
Usually the blower motor resister has gone bad.
If you are saying the Blower Motor only works on high, then your problem is a defective Blower Motor Resistor Pack. Replace it.
blower motor resistor needs to be replaced
faulty blower motor resistor
I would suspect the blower motor speed resister is shot.
The blower motor resistor pack is bad.