answersLogoWhite

0

If it is a Electronic Auto transmission (1990ish onwards), it could be that the computerised gear change moduals are not working. Check the fuse first.

It would be running in 'limp home mode' and only staying in third gear. even moving off from start in it.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Why does my 940 Volvo stick in first gear until it warms up?

drain the gearbox and refill with ATF the valves in the gearbox stick due to dirty ATF.


How do you change an auto gear selector in a ba falcon?

geat a new gearbox mate gant change them


Transferring Ea Ford Falcon automatic gearbox into a EL Ford Falcon?

depends on ea falcon, is it 3 or 4 speed? and age of ea, if its 4 speed and a later ea u can, the other problem is the gear shift handle, the differ slighty from ea, eb, ed, to ef ef series, but a little stuffing around u can get it


Can you fit Ford Escort gearbox to Ford cortina motor?

YOU NEED TO HAVE BELL HOUSING FROM CORTINA IF IT FITS GEARBOX IT WILL FIT IN TO CORTINA IM ASSUMING THAT THE CORTINA IS A MK11 IT ALSO HAS TO BE OF SAME YEAR. ALSO CHECK RATIO OF GEARBOX YOU WILL HAVE TO USE THE GEAR STICK FROM GEARBOX AS THEY ARE DIFFERANT THREADS HOPE THIS IS OF HELP KIFF which model of escort? which model of cortina? If the engine is the kent crossflow type in both vehicles then the gearbox will fit either engine


Why does a stick shift pop out of only one gear?

The synchro cones in the gearbox are worn. Either a strip and replace or a whole gearbox swap is the cure.


Where to pour the gear box oil on Ford Laser?

on top of the gearbox, some is on the side


What gearbox will replace a 4g63 t gearbox?

5t7j gear box


Where is the gear box for a 2001 ford ranger stick shift?

The gear box ( manual transmission ) is bolted to the rear of the engine


What is scraping sound when you move gear stick?

the gears probably arent meshing when you change gears. Either the clutch is bad, or you need a new gearbox.


What does a cable shift mean?

Quite simply it means that the connection between the gear lever & the gearbox is a cable. Other means of connection are. Direct from the gear lever into the gearbox Rod linkage between the gear lever & the gearbox.


02 ford excursion jerks and dies when in gear?

first thing to check is the gearbox oil remember you have to check the oil with the engine running


Gear stick wont go into gear clutch saxo?

1999 ford explorer 4.0 manual transmission gear shifter wont fit on shaft