0
generally the spindle nut needs replacing when you remove the nut. the new nut has a nylon locking ring on it, that is only designed to stay tight one time. once this is removed the nut will not stay tight with a second application The nut is a torque to yield design. After reaching torque specs, the threads have stretched. Reusing the nut will allow the nut to back off, since you can't properly torque it but one time.
What else can I help you with?
What is the torque specs for the front spindle nut on a 2000 impala?
2000 f150 fron axle nut
Is it necessary to replace spindle nut on f150?
Replacing the spindle nut on a Ford F-150 is not always necessary unless it shows signs of wear, damage, or if it has been removed during maintenance. If the spindle nut is stripped or corroded, it should be replaced to ensure proper wheel assembly and safety. Always consult the vehicle's service manual for specific recommendations regarding maintenance and replacement.
How do you take the key way out of the spindle nut?
To remove the key from the spindle nut, first loosen the nut using the appropriate tool. Once the nut is loose, slide the key out of the keyway on the spindle shaft by grasping it firmly and pulling it out. Be cautious not to damage the key or the spindle during this process.
Rear spindale nut torque spec Kia Rio for 2001?
need to find out what is the spindle nut torque specification for a 2001 KIA RIO
What is the proper size socket for a spindle nut on a 1991 Honda Civic lx?
The front spindle nut on a 1991 Honda Civic requires a 32mm axle nut socket.
What is theFront spindle nut size?
should be 17mm
What is the size of the spindle nut on a 1999 sable?
30mm
What is the rear spindle nut size?
Its a 30mm socket
How to Replace 1969 Chevelle steering wheel?
take horn cap off the center of the steering wheel and you will see large nut holding the wheel to the spindle, loosen nut and then you will need a wheel puller, install puller and tighten the nut down on the puller until the steering wheel frees itself from the spindle and your done.
What size socket for the spindle nut for a 2004 Chevy cavalier?
Spindle nuts very from 30mm to 34mm
What size socket do you need to remove the spindle nut on a 2003 Sonoma 4x4?
1 3/8 inch deep socket
What size socket do you need for the rear spindle axle nut on a 2003 Rav4?
A 1 3/16" or a 30mm should work.
