0
What else can I help you with?
How do you install anti rattle clips on a 1993 Chrysler LeBaron?
To install anti-rattle clips on a 1993 Chrysler LeBaron, first, lift the vehicle and remove the wheel to access the brake components. Then, remove the brake caliper and rotor to expose the brake pads. Place the anti-rattle clips onto the caliper bracket, ensuring they fit securely into place, and then reassemble the brake system by reinstalling the rotor and caliper. Finally, lower the vehicle and check the brakes to ensure everything is functioning properly.
How do you reset the anti lock brake warning light on a 1996 Chrysler lhs?
You have to read the code, repair the cause of the code, and reset the code with a scan tool.
Can you get a diagram of the location of the anti-rattle clips on the front brakes on a 90 LeBaron convertible?
Yes Go to a Chrysler Dealer and ask the parts department to print you one It should be free especialy if they think you intend on buying something
Why does the anti-lock light come on a 1992 Lincoln town car?
A problem has been detected with the Anti-lock Brake System . It could be a fuse , a sensor , or some other problem
How do you remove anti theft system on 1995 Chrysler Cirrus?
How do i remove the anti theft system on my 1995 Chrysler Cirrus?
Why is the esp bas light on in a Chrysler 300?
The ABS (anti lock brake) computer has detected a fault in the ESP (electronic skid protection) or BAS (brake assist system). You will need to have the system checked for codes to know possible causes.
Brake lines diagram on 1997 Chrysler LHS?
The brake lines diagram for a 1997 Chrysler LHS typically illustrates the routing of the brake lines from the master cylinder to each wheel, including connections to the anti-lock braking system (ABS) if equipped. It shows the layout of the front and rear brake lines, highlighting key components like the brake proportioning valve and any junction blocks. For accurate details, it's best to consult a service manual specific to the 1997 Chrysler LHS or a repair guide, as these diagrams can vary based on the vehicle's specific configuration.
How do you get the anti-lock brake light to go off on a 1992 Buick Roadmaster?
I need to know how to check the anti lock brake to get the light off. New brakes from and rear were installed and light is still on. I some one knows who to trouble shoot this or how to check it, please let me know.
I have a 1999 Chrysler lhs with the traction control light and anti-lock light coming on when you put your foot on brake after startup. What is the problem?
Bring to a shop that has an ABS scanner to determine the problem
Why does the anti lock brake slip?
Because it is anti lock
2006 Chrysler 300 ABS and EPS light on?
The anti lock brake computer has detected a malfunction and set a trouble code. You will need to have the vehicle checked with a scan tool to know the code or codes.
Where do you apply the anti squeek?
I assume you're referring to Brake Pad anti-squeel. To the back of the Brake Pad (with the clips) and not the side that presses against the Brake rotor (material side).
