Needs to be readjusted.
there will be a separate heated windshield switch below the window lock switch.
The wiper motor is located under the black plastic cowl below the windshield.
Probably a bad thermostat.
There are a couple of screws that will allow you to adjust the position of the window glass on the driver side. In order to get to them, you will have to remove the door panel and water shield. At that point the screws can be loosened and the window adjusted to move properly. There should be a link to the left or below this answer that has some pictures of where these screws are.
On your 1999 Chevrolet Venture, the Flasher is located: Below the instrument panel, left of the steering column.
On most Escape, there is a small wheel below the main windshield wiper knob. It should have settings 0,1, and 2, along with a spray setting.
The 2004 Chevy Venture has the most common hook-end arms. See related links below for install video. Press the tab or button which is located where the wiper blade is inserted into the hook and pull the wiper blade out of the hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Pretty easy if it's not rusted on. There should be a tab you push down and slide the wiper back and off. If you can't get it, go to autozone not to name drop but they can do it for you for free. See wiper blade installation videos for hook-end wiper arms below.
Trouble code P0128 means: ECT Sensor Below Thermostat Regulating Temperature
The oil filter is on the forward side of the engine directly below the hood latch.
Under the front cowl just below the front window and there not fun to change
Hi, Most of the time a problem like this is either the wiring between the switch and the window motor or the switch. You will need to do a little troubleshooting, but it is a relatively simple circuit that controls the windows. I have a link below that will explain how the windows work and also has a drawing of the circuit. Good Luck, Greg