Problem with plug shorting?
You likely have a short circuit in the rear light harness somewhere.
my rear left indicator and alarm light doesnt work, hoe do I change the bulb?.
you take the light out and put the new one in
the left rear indicator light is only working intermitantly, how can this fault be rectified
To change the rear indicator bulb on a Ford Fiesta, first, open the rear hatch and locate the light assembly. Remove the relevant access panel or screws to detach the light unit from the vehicle. Twist the bulb holder counterclockwise to remove it, replace the old bulb with a new one, and reassemble the light unit by reversing the steps. Finally, test the indicator to ensure it’s functioning properly.
Rear differential locker button is depressed.
To change the rear indicator bulb on a Peugeot Boxer, first, open the rear doors and locate the light cluster. Remove the retaining screws or clips securing the light assembly, then gently pull it out. Twist the bulb holder counterclockwise to release it, replace the old bulb with a new one, and reassemble the light cluster by reversing the disassembly steps. Finally, test the indicator to ensure it’s working properly.
first of all, i hope you are installing the proper bulb. brake light? 1157 if yes, you probably have a water leak and blowing the bulb. over time if water gets on the bulb, it will turn white, compared to clear. to avoid this from happening again, see if there is a leak, and try to seal it or replace the light assembly.
we have recently fitted two new plugs on the back of our truck however, the rear r/h indicator on the caravan is not working and the red light on the dashboard does not light up when the indicator is on
To change the rear indicator light bulb on a Peugeot 307, first, open the boot and locate the access panel behind the rear light cluster. Remove the panel by unscrewing or unclipping it, depending on the model. Once accessed, twist the bulb holder counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb holder, secure the access panel, and test the indicator light to ensure it’s working.
To replace the rear indicator bulb in a Nissan Qashqai, start by opening the rear hatch and locating the tail light assembly. Remove the screws or clips securing the tail light unit, then gently pull it away from the vehicle. Twist the bulb holder counterclockwise to remove it, replace the burned-out bulb with a new one, and reassemble the tail light by reversing the steps. Finally, test the indicator to ensure it’s functioning correctly.
To change the rear indicator bulb in a Mazda 6, first, open the trunk and locate the rear light assembly. Remove the cover or access panel by unscrewing or unclipping it, then twist the bulb socket counterclockwise to release it. Pull out the old bulb and replace it with a new one, ensuring it is securely fitted. Finally, reassemble the light assembly and test the indicator to ensure it works properly.