0
Why does your 1995 Chevrolet caprice misfire after you changed the spark plugs and wires?
Wiki User
∙ 14y ago
you either did not gap the plugs to spec or you put this wires on wrong
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why does 1991 Chevrolet caprice stall out?
There are a couple of reasons a 1991 Chevrolet Caprice may stall out. The car may need a new distributor cap or the plugs may need changed. A mechanic will be able to determine the causes of the stalling car.
What is the specified gap setting for spark plugs on a 1986 Chevrolet Caprice?
.035
Where do you find the spark plugs on a 91 caprice?
There are four spark plugs on each side of your 1991 Chevrolet engine. The spark plugs will be near the bottom of the engine.
What are the electric plugs on the thermostat housing of a Chevrolet caprice with 5.0L v8 for?
Connections for the water temperature sensor.
How hard is it to replace the frost plugs on a 1990 Chevrolet Caprice 350?
Its not easy. I did it on a 77 Caprice and it took me three days and two broken fingers. Take it to a shop.
Misfire on a 1996 Bonneville you changed spark plugs and wires What is your next option?
Fuel injectors or coil
Why does your 1989 Chevrolet caprice start up but stalls when it is put in gear?
check your fuel filter and also your spark plugs.
Where is the turn signal flasher location on 1966 Chevrolet caprice?
look for the round silver or chrome cylinder that plugs into the fusebox.
What could cause a cylinder misfire in a 97 buick lesabre?
I have a 95, had a misfire... mine was because of the plug wires... changed the wires and plugs mis fire stopped...
What causes a 2002 Mitsubishi lancer to misfire?
Last summer, the cylindars started to misfire on my 2002 lancer. Once the spark plugs were changed, I haven't had any more issues.
What is making my 1999 Ford Contour misfire?
There are a couple of reasons why a 1999 Ford Contour may misfire. The spark plugs may need changed or the coil pack may be bad.
What can cause misfire on a caprice?
The distributor could be failling, there might not be enough fuel or air reaching the engine (too much is bad too), or your spark plugs/wires are damaged or not to spec.
