These have issues w the lifters holding pressure even w engine off wifes 02 had a dead cyl #5 specifically (center front of engine) pulled valve cover start van loosen rockers 2 at a time to the edge of making clacking if idle clears you need lifters. Lifters stay pumped up holding valves open and at high rpm (freeway speed) because all are at same pressure. Hope that helps can cause stalling and constant engine light, note all the control modules are linked to pcm engine light on will cause other random lights like abs brake and mil light stalling ect to trick you into dealer. DO NOT USE FOXWELL SCANNERS ON THIS VEHICLE WILL CAUSE UNDESIRED OPERATION.
You might want to check your main vacuum line
That's your LOW tire pressure warning light in a 2002 Ford Windstar
See sources and related links below to lookup Ford Windstar brake light lamp part numbers by vehicle year.
brake light bulb out
On a 2001 Ford Windstar : The warning light in the low right corner of your gauge cluster is the ( low washer fluid warning light ) * according to a drawing in the owners manual *
What does it mean when explanation mark with rings around d it on a Ford windstar
I should be able to answer your question if you say which YEAR of Ford Windstar ( I was looking at the 1996 Ford Windstar owners manual and it doesn't have any warning lights above the engine temperature gauge )
On a 1996 Ford Windstar : No , just the LOW oil pressure warning light in the left side of your gauge cluster
Ford Windstar was created in 1994.
to be honest idont know
Fill it up with oil...
When I bought my ford windstar it was used and later discovered the sway bar needed replacing. I am not saying that this is your problem but it is worth checking out also check you motor mounts, tires.