Have you checked the brake fluid level in your brake master cylinder in your engine
compartment ? a low level will turn on your brake light in the dash
Bad switch on the emergency brake handle.
When my 2003 suburban did it. It turned out to be bearings. After replacing the bearings, no problems since. The bearing assembly has abs sensor attached.
Blown bulb/ bad bulb
Unscrew the bulb by turning it coumterclockwise and it will come out of the assembly.
emergency brake light stays on
The light on the dash that says the emergency brake light is on could have burned out if it does not light up when the emergency brake is actually on. In some vehicles, this light will not light up until the car is put into gear to warn the driver that the emergency brake is still on.
Pull the release handle for the e brake and then while its pulled out pull up on the pedal
my brake light stay on but emergency brake is unhooked
Brake light on and why
That's easy... it's all in your mind, the last Chevy prizm model year was 2002
follow the brake pedal to the house, and you will see the harness behind that. follow that harness and it will lead to a second plug that you can access on work on
I have never seen one. If you want them off you have to press on the emergency brake a little.